Series HP-A Gearbox
Alternative Metric Design
The Series HP-A gearbox features the high performance and dependability of Cone Drive’s double enveloping worm gearing in a metric, universal housing. Offering features ideal for the processing and material handling markets, the Cone Drive Series HP-A gearbox provides high torque in a compact package.
Key Features
- Double Enveloping Worm Gearing
- Two Input Bearings
- Low or Standard Backlash
- Cast Iron Construction
- Universal Housing with Optional Drywell Feature
- Best in Class Lead Times
- 5 Year Warranty
SERIES HP-A SPECIFICATIONS
- Center Distance: 100 thru 200 mm
- Ratio: 5:1 thru 70:1
- Reductions: Single
- Output Torque (ConstantSpeed): < 88,100 lb-in
- Orientation: Worm over gear, worm under gear, vertical gearshaft
- Input Shaft: Inch or metric, single or double extended
- Output Shaft: Inch or metric, solid (single or double extended), hollow
- Additional Options: Fan cooled, double oil seals, Viton seals, drywell feature
FAQ's
Cone Drive’s double enveloping worm gear has an hourglass shape and the gear is machined with unique contours to ensure maximum contact between the components. This added contact creates a high torque capacity, high durability worm gear. Cone Drive’s worm gear design provides you a higher load capacity, lower contact stress, and greater shock capacity. These improved ratings offer you the flexibility to downsize the gearbox to save space or increase the motor to get more power
Please refer to the Approved Lubrication List.
Please review the Installation and Maintenance manual for proper oil amounts.
User will assume risk of non-approved lubricants which may affect performance of the gearbox and void warranty.
Normal gearbox operating temperature measured at the oil sump area of the housing should not exceed 100°F (38°C) above ambient temperature or 200°F (93°C) maximum. If the gearbox operating temperature exceeds these limits, shut down the unit and contact Cone Drive. Excessive oil sump temperature is indicative of overloading, misalignment, or improper or marginal lubrication. Continuous operation of the gearbox with the oil sump temperature above 200°F (93°C) will result in failure of the gearbox
Backdriving or self-locking cannot be guaranteed by Cone Drive, therefore a brake mechanism is always recommended
A fan should be used whenever the absorbed power in a continuous application exceeds the thermal horsepower rating of the unit
Yes – Please contact our Repair & Rebuild center.
Zero backlash units are designed for cyclic (non-continuous) positioning applications. Ratios below 20:1 are not suggested. Long duty cycle applications can cause excessive gearbox heat and wear. The motor horsepower required for a zero backlash design is higher than that of a standard design gearset
Yes. Our engineering team at Cone Drive has years of experience creating customized solutions for our customers. Please reach out to our Application Engineering team to get started.
Cone Drive has developed a specialized sectioned worm design to achieve zero backlash. As the gear wears, the worm self-adjusts to compensate and maintain zero backlash.
PRODUCT DEVELOPMENT
The Cone Drive Product Development Laboratory is a state-of-the-art facility directly adjacent to our Traverse City, Michigan manufacturing location. The lab has the capacity to test a wide range of gear reducer products, for both Cone Drive products as well as those manufactured by other companies. The lab includes capability to run a wide variety of tests including load testing for evaluating reducer performance and operating efficiency.
TEST + CONTROL
PRODUCT MEASUREMENT
- Six product testing stands
- Servo cyclic control
- Simulated inertial loading
- Constant torque/load
- Durability/validation
- Accelerated life test
- Lubricant evaluation
- Static loading & stiffness
- Displacement & motion
- Torque
- Thermal
- Efficiency
- Vibration
- Basic noise
- Transmission accuracy